- Product details
Technical Requirements
Category | Item | Index |
Properties | Appearance | White powder |
Solid content,% | 99±1 | |
Stacking density, g/l | 400-500 | |
Ash content,% | 12±2 | |
PH value | 6-8 | |
Lowest film-forming temperature,℃ | 0±2 | |
Glass transition temperature,℃ | -5-10 | |
Safety | Non-toxic |
Main function
It can be dispersed in water ,enhance the adhesion strength between morters
To support and improve the mechanical properties of morters
Reinforce the constructability of mortar
To improve the tensile strength and enhance the bending strength
Reduce the modulue of elasticity and improve the deformability
Increase the density of the material
Applications
Insulation （EPS/XPS）mortar, plaster mortar(anti-crack),waterproof mortar
heat preservation system, exterior flexible putty, flexible thin layer of
morter, wear-resisting flooring concrete repair plastering anhydrite adhesive
mortar ,adhesion agent caulking compounds, interior and exterior wall coating ,etc
Packing and storage
25kgbottom valve mouth multilayer composite paper-plastic bag
Packaging, lined with polyethylene film bag, It must be stored in a cool ,dry place
And the unused part shall be sealed as soon as possible after opening the bag
Its useful life is 6 months and it should be used as early as possible under
High temperature and wet conditions to avoid increasing the agglomeration
Probability. Because of the thermoplasticity of the powder, the stacked height
Of the product is not allowded exceeding one tray